|本期目录/Table of Contents|

[1]陈敏,肖玄,汤爱涛.钛精矿制备碳氮化钛复合粉的球磨参数研究[J].有色金属科学与工程,2016,(05预):405-409.
 CHEN Min,XIAO Xuan.Research on the Milling Parameters of Titanium Carbonitride Prepared by Titanium Concentrate[J].,2016,(05预):405-409.
点击复制

钛精矿制备碳氮化钛复合粉的球磨参数研究(/HTML)
分享到:

《有色金属科学与工程》[ISSN:1674-9669/CN:36-1311/TF]

卷:
期数:
2016年05期预
页码:
405-409
栏目:
出版日期:
2016-10-31

文章信息/Info

Title:
Research on the Milling Parameters of Titanium Carbonitride Prepared by Titanium Concentrate
作者:
陈敏1肖玄1汤爱涛2
材料工程学院,四川 攀枝花 617000; 2.重庆大学,材料科学与工程,重庆 400044)
Author(s):
CHEN Min XIAO Xuan
School of Materials Science and EngineeringPanZhihua UniversitySiChuan Province 617000China
关键词:
钛精矿球磨时间球磨转速还原进程
分类号:
-
DOI:
-
文献标志码:
-
摘要:
以钛精矿和石墨为原料,经球磨混料后通过碳热还原法制备了含铁的碳氮化钛复合粉。结合X射线衍射分析、TG-DSC热分析和SEM扫描电镜显微分析,主要研究了球磨参数对钛精矿/石墨混合粉料还原进程的影响。当球磨时间为4 h,球磨转速为450 r/min时,石墨的无定型化有利于加快还原反应进程。开始反应温度提前了360 ℃,失重为35 %,达到了反应平台。

参考文献/References:

[1]Guo Chen,Zeng Kaisong,Jin Chen,et al. Evaluation of the reduction product of carbonthermal reduction of ilmenite ores[J].Journal of Alloys and Compounds,2013,577: 610-614.
[2]M.Mozammel, A.Mohammadzadeh. The influence of pre-oxidation and leaching parameters on Iranian ilmenite concentrate leaching efficiency: Optimization and measurement[J].Measurement,2015,66: 184-194.
[3]余鹏飞,叶金文,刘颖,等. 几种碳源对碳热还原氮化法制备 Ti (C, N) 粉末的影响[J].功能材料,2011,42(5): 850-853.
[4]V.S.Gireesh,V.P.Vinod,S.Krishnan Nair,et al. Catalytic leaching of ilmenite using hydrochloric acid: A kinetic approach[J]. International Journal of Mineral Processing,2015,134: 36-40.
[5]Tripathy M,Ranganathan S,Mehrotra SP. Investigations on reduction of ilmenite ore with different sources of carbon[J].Mineral Processing and Extractive Metallurgy,2012,121(3): 147-155.
[6]Welham NJ. Enhanced gas-solid reaction after extended milling[J].Journal of Materials Science Letters,2001, 20(20): 1849-1851.
[7]Chen Y. Ball milling assisted low temperature formation of iron-TiC composite[J].Scripta Materialia,1997,36(9).
[8]Welham NJ. A parametric study of the mechanically activated carbothermic reduction of ilmenite[J].Minerals Engineering,1996,9(12): 1189-1200.
[9]Pourghahramani Parviz,Forssberg Eric. Effects of mechanical activation on the reduction behavior of hematite concentrate[J].International Journal of Mineral Processing,2007,82(2): 96-105.
[10]郭宇峰,游高,姜涛,等. 攀枝花钛铁矿固态还原行为[J].中南大学学报 (自然科学版),2010,41(5): 1640.
[11]Tan Ping, Hu Huiping, Zhang Li. Effects of mechanical activation and oxidation-reduction on hydrochloric acid leaching of Panxi ilmenite concentration[J].Transactions of Nonferrous Metals Society of China,2011,21(6)1414-1421.
[12]Farit Kh.Urakaev. Influence of the conditions of mechanical activation of the mixture of ilmenite and carbon on the pigment preparation[J].International Journal of Mineral Processing,2011,101(1-4): 37-41.
[13]Welham NJ, Berbenni V,Chapman PG. Effect of extended ball milling on graphite[J].Journal of Alloys and Compounds, 2003,349(1): 255-263.
[14]Welham NJ,Berbenni V,Chapman PG. Increased chemisorption onto activated carbon after ball-milling[J].Carbon, 2002,40(13): 2307-2315.
[15]刘云龙,郭培民,庞建明,等. 高杂质钛铁矿固态催化还原动力学研究[J].钢铁钒钛,2013,34(6): 1-5.
[16] B.N.Akhgar,P.Pourghahramani. Impact of mechanical activation and mechanochemical activation on natural pyrite dissolution[J].Hydrometallurgy,2015,153: 83-87.

相似文献/References:

[1]熊大和.圆满完成南非钛铁矿选矿第一期半工业试验任务[J].有色金属科学与工程,1995,(01):48.
[2]张雪辉a,b,章标a,等.W-4.9Ni-2.1Fe高比重合金的摩擦磨损行为研究[J].有色金属科学与工程,2016,(05预):1.
 ZHANG Xuehuia,b,ZHANG Biaoa,et al.Friction and Wear Characteristics of 93W-4.9Ni-2.1Fe Alloys Prepared by Spark Plasma Sintering[J].,2016,(05预):1.
[3]张雪辉a,b,章标a,等.W-4.9Ni-2.1Fe高比重合金的摩擦磨损行为[J].有色金属科学与工程,2016,(04):33.[doi:10.13264/j.cnki.ysjskx.2016.04.006]
 ZHANG Xuehuia,b,ZHANG Biaoa,et al.Frictional wear behavior of tungsten heavy alloys 93W-4.9Ni-2.1Fe[J].,2016,(05预):33.[doi:10.13264/j.cnki.ysjskx.2016.04.006]
[4]陈敏,肖玄,汤爱涛.钛精矿制备碳氮化钛复合粉的球磨参数研究[J].有色金属科学与工程,2015,(04):62.[doi:10.13264/j.cnki.ysjskx.2015.04.013]
 CHEN Min,XIAO Xuan,TANG Aitao.Milling parameters of titanium carbonitride prepared by titanium concentrate[J].,2015,(05预):62.[doi:10.13264/j.cnki.ysjskx.2015.04.013]

备注/Memo

备注/Memo:
基金项目:四川省应用基础研究项目,编号:2014JY0132;攀枝花市科技支撑项目。编号:No.2013CY-G-7 ; No.2014CY-G-26-1。作者简介:陈敏(1985-),女,讲师,博士,主要从事粉末冶金材料制备研究。E-mail: cmrre@163.com。
更新日期/Last Update: 2016-03-29