|本期目录/Table of Contents|

[1]章杨荣,陈颢,等.AlCrN/硅系陶瓷在大气、海水环境下的摩擦学性能[J].有色金属科学与工程,2017,(01预):66-71.
 ZHANG YangrongCHEN Hao XIONG wei.Tribological performance of AlCrN coating sliding against Si-based ceramic balls in ambient air and seawater conditions[J].,2017,(01预):66-71.
点击复制

AlCrN/硅系陶瓷在大气、海水环境下的摩擦学性能(/HTML)
分享到:

《有色金属科学与工程》[ISSN:1674-9669/CN:36-1311/TF]

卷:
期数:
2017年01期预
页码:
66-71
栏目:
出版日期:
2017-01-30

文章信息/Info

Title:
Tribological performance of AlCrN coating sliding against Si-based ceramic balls in ambient air and seawater conditions
作者:
章杨荣1陈颢1 2熊伟1
(1.江西理工大学 材料科学与工程学院,江西 赣州 341000;2.钨资源高效开发及应用技术教育部工程研究中心,江西 赣州 341000; )
Author(s):
ZHANG Yangrong1CHEN Hao 12XIONG wei 1
(1.School of Materials and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou, 341000,China2.Engineering Research of Center of High-efficiency Development and Application Technology of Tungsten Resources, Ministry of Education, Ganzhou, 341000, China)
关键词:
多弧离子镀AlCrN涂层Si3N4SiC海水摩擦学
分类号:
-
DOI:
-
文献标志码:
A
摘要:
采用多弧离子镀技术在316L不锈钢基底上沉积AlCrN涂层。通过扫描电子显微镜(SEM)、X 射线衍射仪(XRD)、纳米压痕仪等分析测试手段,对镀层的形貌、成分、相结构、硬度等进行表征,并利用摩擦磨损实验机Rtec考察AlCrN/陶瓷(Si3N4、SiC)在大气、海水环境下的摩擦学性能。结果表明:在大气、海水环境下,AlCrN/SiC的摩擦系数和磨损率都远小于AlCrN/Si3N4;SiC球表面的微观凹坑对氧化膜SiO2起到收纳作用,同时减少磨粒磨损。较之于Si3N4陶瓷配副,AlCrN涂层与SiC陶瓷对磨时表现出更为优异的摩擦学性能。

参考文献/References:


1. ATAR E, ALPASHLAN O, CELIK O, CIMENOGLU H, Tribological Properties of CrN Coated H13 Grade Tool Steel [J]. Journal of iron and steel reaserch, 2014. 21(2): 240-245
2. NIU Y, WEI J, YU Z, Microstructure and tribological behavior of multilayered CrN coating by arc ion plating[ J]. Surface and Coatings Technology, 2015. 275: 332-340
3. 曾鹏, 彭神华, 胡社军, 谢光荣, AlCrN涂层刀具研究新进展[J]. 工具技术, 2008. 42(3): 16-18
4. 卞正文, AlCrN涂层在热锻模中的应用[J]. 模具工业, 2015. 41(2): 48-51
5. KALSS W, Boosting Machining Productivity with the Aid of Coatings, ATZproduktion worldwide eMagazine[J]. 2011. 4(3): 34-37
6. CEGIL O, KINLINC B, Corrosion Properties of CrAlN and TiAlN Coatings Deposited by Thermoreactive Deposition Process[J]. Acta Physical Polonica, 2014. 125(2): 359-361
7. 范爱兰, 唐宾, 田林海, 吴培强, 刘道新, CrN涂层高速钢在Na3PO4水溶液中的摩擦-腐蚀电化学噪声行为[J]. 中南大学学报, 2012. 43(5): 1690-1696
8. SUN K, PHAM V, KIM C, Cell adhesion to cathodic arc plasma deposited CrAlSiN thin films[J]. Applied Surface Science, 2012. 258(18): 7202-7206
9. LANDOLT D, MISHLER S,Tribocorrosion of passive metals and coatings[M]. Elsevier, 2011
10. 严立新, 袁成清, 白秀琴, 徐立, 绿色船舶的摩擦学研究现状与进展[J]. 摩擦学学报, 2012. 32(4): 410-421.
11. 王建章, 陈贝贝, 阎逢元, 海水组分对海水润滑性能的影响[J]. 润滑与密封, 2011. 36(11): 1-5
12. LIU C, LEYLAND A, BI Q, MATTHEWS A, Corrosion resistance of multi-layered plasma-assisted physical vapour deposition TiN and CrN coatings[J]. Surface and Coatings Technology, 2001. 141: 164-173
13. 单磊, 王永欣, 李金龙, CrN和CrAlN涂层海水环境摩擦学性能研究[J]. 摩擦学学报, 2014. 34(4): 468-476
14. SHAN L, ZHANG Y, WANG Y, JIANG X, Corrosion and wear behaviors of PVD CrN and CrSiN coatings in seawater[J]. Transactions Nonferrous Metals society of China, 2016. 26: 175-184
15. SHAN L, WANG Y, LI J, CHEN J, Effect of N2 flow rate on microstructure and mechanical properties of PVD CrNx coatings for tribological application in seawater[J]. Surface and Coatings Technology, 2014. 242: 74-82
16. SHAN L, WANG Y, LI J, CHEN J, Tribological Behaviors of CrN and CrAlN Coatings in Seawater[J]. Tribology, 2014. 34(4): 468-476
17. REITER A, DERLINGER V, HANSELMANN B, BACHMANN T, SARTORY B, Investigation of the properties of Al1?xCrxN coatings prepared by cathodic arc evaporation[J]. Surface and Coatings Technology, 2005. 200(7): 2114-2122
18. LI T, ZHOU Y, LI M, LI Z, Phase segregation and its effect on the adhesion of Cr–Al–N coatings on K38G alloy prepared by magnetron sputtering method[J]. Surface and Coatings Technology, 2007. 201: 7692-7698
19. CHEN M, KATO K, ADACHI K, The difference in running-in period and friction coefficient between self-mated Si3N4 and SiC under water lubrication[J]. Tribology Letters, 2001. 11: 23-28
20. 叶育伟, 陈颢, 王永欣, 李金龙, 周升国. 316L不锈钢表面沉积CrCN薄膜的结构及性能研究[J]. 有色金属科学与工程, 2014. 5(2404):49-54
21. 叶育伟,陈颢,王永欣,李金龙. 不同过渡层对CrCN涂层性能的影响[J]. 有色金属科学与工程, 2014. 5 (2606):61-66
22. CHOUQUET C, GAVILLIT J, DUCROS C, SANCHETTE F, Effect of DLC surface texturing on friction and wear during lubricated sliding[J]. Materials Chemistry and Physics, 2010. 123(2-3): 367-371
23. VANDONI L, DEMIR G, PREVITALI B, LECIS N, UGUES D, Wear Behavior of Fiber Laser Textured TiN Coatings in a Heavy Loaded Sliding Regime[J]. Materials, 2012. 5(12): 2360-2382
24. 赵文杰, 王立平, 薛群基, 织构化提高表面摩擦学性能的研究进展[J]. 摩擦学学报, 2011. 31(6): 622-631

相似文献/References:

[1]章杨荣,陈颢,熊伟.AlCrN/硅系陶瓷在大气、海水环境下的摩擦学性能[J].有色金属科学与工程,2017,(01):99.[doi:10.13264/j.cnki.ysjskx.2017.01.017]
 ZHANG Yangrong,CHEN Hao,XIONG Wei.Tribological performance of AlCrN coating sliding against Si-based ceramic balls in ambient air and seawater conditions[J].,2017,(01预):99.[doi:10.13264/j.cnki.ysjskx.2017.01.017]

备注/Memo

备注/Memo:
_______________________________基金项目:江西省高等学校科技落地计划项目 (KJLD12072) , 江西省教育厅科学技术研究项目(GJJ14414)通讯作者:陈颢(1978-),男,博士,教授,主要从事钨基粉体及硬面材料研究, E-mail: chenhao_168168@163.com通讯作者:陈颢(1978-),男,博士,教授,主要从事钨基粉体及硬面材料研究, E-mail: chenhao_168168@163.com作者简介:章杨荣(1990-),男,江西上饶人,硕士, 从事表面硬质涂层研究;E-mail:zyrmaterial@163.com。
更新日期/Last Update: 2016-09-20