|本期目录/Table of Contents|

[1]段柏华a,b,戚诚康a,等.非水基凝胶注模成形制备Mo/Cu合金[J].有色金属科学与工程,2017,(01):56-62.[doi:10.13264/j.cnki.ysjskx.2017.01.010]
 DUAN Bohuaa,b,QI Chengkanga,et al.Preparation of Mo/Cu alloy by non-aqueous gelcasting[J].,2017,(01):56-62.[doi:10.13264/j.cnki.ysjskx.2017.01.010]
点击复制

非水基凝胶注模成形制备Mo/Cu合金(/HTML)
分享到:

《有色金属科学与工程》[ISSN:1674-9669/CN:36-1311/TF]

卷:
期数:
2017年01期
页码:
56-62
栏目:
出版日期:
2017-01-30

文章信息/Info

Title:
Preparation of Mo/Cu alloy by non-aqueous gelcasting
作者:
段柏华ab戚诚康ab王德志ab傅臻ab尹邦柱ab
中南大学, a.材料科学与工程学院;b.有色金属材料科学与工程教育部重点实验室, 长沙 410083
Author(s):
DUAN Bohuaab QI Chengkangab WANG Dezhiab FU Zhenaab YIN Bangzhuab
a. School of Material Science and Engineering; b. Key Laboratory of Nonferrous Material Science and Engineering, Ministry of Education, Central South University, Changsha 410083, China
关键词:
Mo-Cu合金凝胶注模成形干燥脱脂烧结
分类号:
TF125.2;TG146.1
DOI:
10.13264/j.cnki.ysjskx.2017.01.010
文献标志码:
A
摘要:
以球形铜粉和等离子球化钼粉为原料,采用非水基凝胶注模体系制备Mo/Cu合金. 研究分散剂用量和固相体积分数对浆料黏度的影响,并对凝胶生坯的干燥、脱脂和烧结进行分析. 结果表明:浆料黏度随着分散剂用量的增加先减小后增大,随着固相体积分数的升高而增大. 采用丙酮作为液体干燥介质,6 h即可完全脱除凝胶坯体中的残留溶剂. 烧结体的致密度随着烧结温度和烧结时间的升高而增大.

参考文献/References:

[1] 吕大铭. 钼铜材料的开发和应用[J]. 粉末冶金工业, 2000, 10(6):30-33.
[2] 牟科强,邝用庚. Mo/Cu材料的性能和应用[J]. 金属功能材料, 2002, 9(3):26-29.
[3] 孙永伟,刘勇. Mo-Cu复合材料的研究进展[J]. 热处理, 2012, 27(2):16-18.
[4] 王旭,廖春发,肖志华. NaCl-KCl-Na2WO4-CuO体系电解制备钨铜复合粉体研究[J]. 有色金属科学与工程,2012,3(5):34-38.
[5] WANG D Z, DONG X J, ZHOU P, et al. The sintering behavior of ultra-fine Mo-Cu composite powders and the sintering properties of the composite compacts[J]. Int Journal of Refractory Metals and Hard Materials, 2014, 42: 240-245.
[6] 韩胜利,宋月清,崔舜. 压制烧结法制备钼铜合金中的缺陷分析[J]. 粉末冶金工程,2009, 27(2):99-103.
[7] 王婕丽,林文松,姜自旺,等. 纤维结构钼铜复合材料的制备及组织性能[J].中国有色金属学报,2014,24(1):174-178.
[8] YAO T Y, LI C J, CHEN B, et al. Relationships between the properties and microstructure of Mo-Cu composites prepared by infiltrating copper into flame-sprayed porous Mo skeleton[J]. Materials & Design, 2015, 88:774-780.
[9] HO P W, LI, FUH J Y H. Evaluation of W-Cu metal matrix composites produced by powder injection molding and liquid infiltration[J]. Materials Science and Engineering A, 2008, 485(1/2): 657-663.
[10] CHENG J G, WAN L, CAI Y B, et al. Fabrication of W-20 wt.% Cu alloys by powder injection molding[J]. Journal of Materials Processing Technology, 2010, 210(1): 137-142.
[11] SALOMAO R, CARDOSO P H, BRANDI J. Gelcasting porous alumina beads of tailored shape and porosity[J]. Ceramics International, 2014, 40(10): 16595-16601.
[12] WU Z, SUN L C, WAN P et al. Preparation, microstructure and high temperature performances of porous γ-Y2Si2O7 by in situ foam-gelcasting using gelatin[J]. Ceramics International, 2015, 41(10): 14230-14238.
[13] HAJI M, EBADZADEH T, et al. Gelcasting of Al2O3/Ag nanoco-mposite using water-soluble solid-salt precursor[J]. Ceramics International, 2012, 28(1):867.
[14] YE Q, GUO Z M, BAI J L, et al. Gelcasting of titanium hydride to fabricate low-cost titanium[J]. Rare Metals, 2015, 24(5): 351.
[15] YUAN H Y, JIA C C, WANG C C. Effect of gelcasting conditions on quality of porous Al-Cu alloy[J]. Transactions of Nonferrous Metals Society of China, 2015, 25(5): 2018.
[16] LU Z L, CAO J W, BAI S Z, et al. Microstructure and mechanical properties of TiAl based composites prepared by stereolithography and gelcasting technologies[J]. Journal of Alloys and Compounds, 2015, 633: 280.
[17] 石永亮,国志猛,杨秀敏,等. 凝胶注模-真空烧结制备TiC/Fe基钢结硬质合金[J]. 粉末冶金工业,2015, 25(2):20-24.
[18] 段柏华,洪海侠,王德志,等. 凝胶注模溶渗法制备Mo/Cu合金[J].粉末冶金材料科学与工程,2013, 18(5):729-734.

相似文献/References:

[1]段柏华,戚诚康,王德志,等.非水基凝胶注模成形制备Mo/Cu合金[J].有色金属科学与工程,2017,(01预):18.
 DUAN Bohua,QI Chengkang,WANG Dezhi,et al.Mo/Cu alloy fabricated by non-aqueous gelcasting[J].,2017,(01):18.

备注/Memo

备注/Memo:
收稿日期:2016-05-06基金项目:国家自然科学基金资助项目(51274246)通信作者:王德志(1968- ),男,教授,博导,主要从事材料的强化与韧化、新材料制备工艺及机理等方面的研究,Email: dzwang@csu.edu.cn.
更新日期/Last Update: 2017-01-20