|本期目录/Table of Contents|

[1]汪金良,张文海,童长仁.铜闪速炉反应塔内壁挂渣热力学模型初探[J].有色金属科学与工程,2016,(05预):700-704.
　Wang Jin-liang,Zhang Wen-hai,Tong Chang-ren.Study on the thermodynamic model of freeze slag inside reaction shaft of copper flash smelting furnace[J].,2016,(05预):700-704.
点击复制

铜闪速炉反应塔内壁挂渣热力学模型初探(/HTML)
分享到：

《有色金属科学与工程》[ISSN:1674-9669/CN:36-1311/TF]

卷:
期数:
2016年05期预
页码:
700-704
栏目:
出版日期:
2016-10-31

文章信息/Info

Title:
Study on the thermodynamic model of freeze slag inside reaction shaft of copper flash smelting furnace
作者:
汪金良1; 张文海2; 童长仁1
(1. 江西理工大学 冶金与化学工程学院,江西 赣州 341000; 2. 中国瑞林工程技术有限公司,江西 南昌 330002 )
Author(s):
Wang Jin-liang 1;  Zhang Wen-hai 2;  Tong Chang-ren 1
(1. School of Metallurgical and Chemistry EngineeringJiangxi University of Science and TechnologyGanzhou 341000China; 2. China Nerin Engineering Co.,LtdNanchang 330002China)
关键词:
铜闪速熔炼; 反应塔; 挂渣; 热力学模型
分类号:
TF801
DOI:
-
文献标志码:
A
摘要:
将反应塔挂渣作为闪速熔炼的第四相产物，对铜锍、炉渣、挂渣和烟气四相共存体系，基于最小吉布斯自由能原理，建立了铜闪速炉反应塔内壁挂渣热力学模型。模拟计算结果表明，当反应塔中存在局部高氧势时，体系会产生含Fe3O4高的挂渣相，其产出率约为物料量的1.0%；与工业生产实践值相比，挂渣中Fe3O4、SiO2、FeO、Cu2O含量的相对误差分别为9.24%、9.93%、8.10%和6.73%，说明所建立的闪速炉反应塔内壁挂渣热力学模型是可行的，为闪速炉内壁挂渣热力学研究奠定了基础。

参考文献/References:

[1].MOSKALYK R R, ALFANTAZI A M. Review of copper pyrometallurgical practice: today and tomorrow [J]. Minerals Engineering, 2003, 16(10): 893-919.
[2].张文海.闪速熔炼在中国的进展与研究—冷风技术及“非接触冶金”[J].中国有色金属学报, 2004, 14(1): 63-71.
[3].J.?Merry, J.?Sarvinis, N.?Voermann. Designing modern furnace cooling systems [J]. JOM Journal of the Minerals, Metals and Materials Society, 2000, 52(2): 62-64.
[4].T.?Plikas, L.?Gunnewiek, T.?Gerritsen, Monte?Brothers, Alan?Karges. The predictive control of furnace tapblock operation using CFD and PCA modeling[J]. JOM Journal of the Minerals, Metals and Materials Society, 2005, 57(10):37-43.
[5].L. Gunnewiek, J. Suer, R. Macrosty, T. Gerritsen, A. Karges. Developing a tapblock diagnostic system[C]. Third International Platinum Conference ‘Platinum in Transformation’, The Southern African Institute of Mining and Metallurgy, 2008,203-210.
[6].Li Xinfeng, Mei Chi. Numerical simulation analysis of Guixi copper flash smelting furnace[J]. Rare Metals, 2002, 21(4):260-265.
[7].Chen?Zhuo, Mei?Chi, Chen?Hong-rong, Mo?Jiao. Simulation of moving boundary of the reaction shaft in a flash smelting furnace[J]. Journal of Central South University of Technology, 2001, 8(3):213-218.
[8].Wang Jinliang, Wang Houqing, Tong Changren, Zhang Wenhai, Zhang Chuanfu. Simulation of Frozen Slag inside Brickless Reaction Shaft of Flash Smelting Furnace [J]. Metallurgical and Materials Transactions B, 2013, 44(6): 1572-1579.
[9].Goto Sakichi. Equilibrium calculations between matte,slag and gaseous phases in copper smelting. In:Jones M J ed. Copper Metallurgy-Practice and Theory. London: Institute of Mining and Metallurgy, 1975, 23.
[10].Nobumasa Kemori. The application of equilibrium calculations to a copper flash smelting furnace. Journal of the Ming and Materials Processing Institute of Japan, 1987, 103(5).
[11].黎书华,黄克雄,梅显芝. 贵溪闪速炉铜锍熔炼过程热力学模型[J]. 中南工业大学学报, 1995, 26(5): 627-631.
[12].Tan Pengfu,?Neuschütz Dieter. A thermodynamic model of nickel smelting and direct high-grade nickel matte smelting processes: Part I. Model development and validation[J]. Metallurgical and Materials Transactions B, 2001, 32(2): 341-351.
[13].谭鹏夫，张传福，李作刚，等. 在铜熔炼过程中第VA族元素分配行为的计算机模型[J]. 中南工业大学学报, 1996, 26(4): 479-483.
[14]. 汪金良，张传福，张文海. 铅闪速熔炼过程的多相平衡模型[J]. 中南大学学报, 2012,43(2): 429-434.
[15].汪金良，王军. 闪速连续炼铜炉型数值模拟研究[J]. 有色金属科学与工程, 2014, 5(1): 30-36.
[16].童长仁,吴卫国,周小雪.铜闪速熔炼多相平衡数模的建立与应用[J].有色冶金设计与研究, 2006, 27(6):6-9.
[17].陈卓. 铜闪速炉系统数值熔炼模型及反应塔炉膛内形在线仿真监测研究[D]. 长沙：中南大学能源科学与工程学院，2002: 48-54.
[18].KEMORI N, DENHOLM W T, KUROKAWA H. Reaction mechanism in a copper flash smelting furnace [J]. Metallurgical and Materials Transactions B, 1989, 20(6): 327-336.
[19].WANG Jin-liang, WU Yan-xin, LIANG Li-wei. Evaluation of Melting Point of the Freeze Slag in Reaction Shaft of Flash Smelting Furnace [J]. Advanced Materials Research, 2012, 402: 277-282.
[20].梁英教, 车荫昌. 无机物热力学数据手册[M]. 沈阳:东北大学出版社, 1993: 458.
[21].Shimpo R, Watanabe Y, Goto S, Ogawa O. An application of equilibrium calculations to the copper smelting operation[C]//Advances in sulfide smelting. Utah: Americal Institute of Mining, Metallurgical and Petroleum Engineers, 1983: 295-316.
[22].谭鹏夫, 张传福. 铜熔炼过程中伴生元素分配行为的计算机模型[J]. 金属学报, 1997, 33(10): 1094-1100.

相似文献/References:

[1]张兰芝.富氧在国外闪速熔炼的实绩及国内炼铜工艺改造的设想[J].有色金属科学与工程,1988,(01):38.
[2]柴满林.铜闪速熔炼烟灰酸浸渣制备磁性材料[J].有色金属科学与工程,2015,(03):56.[doi:10.13264/j.cnki.ysjskx.2015.03.011]
　CHAI Manlin.TF146.1；TF811[J].,2015,(05预):56.[doi:10.13264/j.cnki.ysjskx.2015.03.011]
[3]汪金良,张文海,童长仁.铜闪速炉反应塔内壁挂渣热力学模型探析[J].有色金属科学与工程,2014,(05):23.[doi:10.13264/j.cnki.ysjskx.2014.05.004]
　WANG Jinliang,ZHANG Wenhai,TONG Changren.Thermodynamic model of freeze slag inside reaction shaft of copper flash smelting furnace[J].,2014,(05预):23.[doi:10.13264/j.cnki.ysjskx.2014.05.004]

备注/Memo

备注/Memo:
通讯作者：汪金良（1976-），男，副教授，主要从事冶金工艺理论及数模仿真研究. E-mail: simwjl@163.com.输出结果
更新日期/Last Update: 2016-04-01