|本期目录/Table of Contents|

[1]彭丽军,解浩峰,尹向前,等.均匀化处理对Cu-Cr-Zr合金显微组织的影响[J].有色金属科学与工程,2015,(02预):19-25.
 Peng Lijun,Xie Haofeng,Yin Xiangqian,et al.Effect of homogenization treatment on Microstructure of Cu-Cr-Zr alloy[J].,2015,(02预):19-25.
点击复制

均匀化处理对Cu-Cr-Zr合金显微组织的影响(/HTML)
分享到:

《有色金属科学与工程》[ISSN:1674-9669/CN:36-1311/TF]

卷:
期数:
2015年02期预
页码:
19-25
栏目:
出版日期:
2015-04-30

文章信息/Info

Title:
Effect of homogenization treatment on Microstructure of Cu-Cr-Zr alloy
作者:
彭丽军解浩峰尹向前杨振米绪军*
北京有色金属研究总院有色金属材料制备加工国家重点实验室,北京 100088
Author(s):
Peng Lijun1 Xie Haofeng Yin Xiangqian Yang Zhen Mi Xujun*
State Key Laboratory of Nonferrous Metals & Processes, General Research Institute for Nonferrous Metals, Beijing 100088, China
关键词:
Cu-Cr-Zr 合金均匀化处理显微组织
分类号:
-
DOI:
-
文献标志码:
-
摘要:
采用OM、SEM和TEM分析手段对Cu-Cr-Zr合金的铸态和均匀化组织进行研究。结果表明,Cu-Cr-Zr合金的铸态组织呈典型的枝晶状组织,主要由网状的Cr枝晶、共晶组织和基体组成,其中共晶组织是由基体和层片状的Cu5Zr相组成。在Cu-Cr-Zr合金的均匀化退火过程中,发生共晶组织的溶解和Cr相的析出。随着均匀化退火温度和时间的升高和延长,共晶组织逐渐溶解,Cr相的析出体积分数逐渐减小。合理的均匀化退火制度为900℃×12h。

参考文献/References:

[1].Liu Q., Zhang X., Ge Y, et al. Effect of Processing and Heat Treatment on Behavior of
[2].Cu-Cr-Zr Alloys to Railway Contact Wire[J]. Metallurgical and Materials Transactions A, 2006, 37(11): 3233-3238.
[3].Batra I. S. Microstructure and properties of a Cu-Cr-Zr alloy[J]. Journal of Nuclear Materials, 2001, 299(2): 91-100.
[4].HolzwarthU., Stamm H. The precipitation behavior of ITER-grade Cu-Cr-Zr alloy after simulating the thermal cycle of hot isostatic pressing[J]. Journal of Nuclear Materials, 2003, 279(1): 31-45.
[5].沈斌, 程建奕, 李海英. Cu-Cr-Zr-Mg合金的相变动力学[J]. 材料热处理学报, 2014, 35(9): 121-125.
[6].张毅, 李瑞卿, 许倩倩, 等. Cu-Cr-Zr合金的高温热压缩变形行为[J]. 中国有色金属学报, 2014, 24(3): 745-751.
[7].Huang F.X., Ma J.S., Ning H.L., et al. Analysis of phase in a Cu-Cr-Zr alloy[J]. Scripta Material, 2003, 48(1): 97-102.
[8].Chbihi A., Sauvage X., Blavette D. Atomic scale investigation of Cr precipitation in copper[J]. Acta materialia, 2012, 60(11):4575-4585.
[9].Knights R. W., Wilkes P. Precipitation of chromium in copper and copper-nickel base alloys[J]. Metallurgica Transaction, 1973, 4(10): 2839-2393.
[10].Weatherly G. C., Humble P., Borland D. Precipitation in a Cu-0.55 wt% Cr alloy. Acta Metallurgica , 1979, 27(12): 1815-1828.
[11]. Komen Y., Rezek J. Precipitation at coherency loss in Cu-0.35 wt pct Cr[J]. Metallurgica Transacation A, 1975, 6(3): 549-551.
[12].Fujii T., Nakazawa H., Kato M., et al. Crystallography and Morphology of Nanosized Cr Precipitates in a Cu-0.2%Cr alloy[J]. Acta materialia. 2000, 48(5):1033-1045.
[13].Rdzawski Z., Stobrawa J. Structure of coherent chromium precipitates in aged copper alloys[J]. Scripta Metallurgical,1986,20(3):341-344.
[14]. Kamijo T., Furukawa T., Watanabe M. Homogeneous nucleation of coherent precipitation in copper-chromium alloys[J]. Acta Metallurgical et Materialia, 1988,36(7):1763-1769.
[15].Zeng K. J. Phase relationships in Cu-rich corner of the Cu-Cr-Zr phase diagram[J]. Scripta Metallurgica Material, 1995, (30): 2009-2014.
[16]. Suzuki H. G., Mihara K., Takeuchi T. Effect of Zr on Aging characteristics and strength of Cu-Cr in-stiu composite[J]. Journal of the Japan Institute of Metals, 1998, 62(3): 238-245.
[17].董志力, 唐祥云, 崛茂德. Cu-Zr和Cu-Zr-Si 合金的时效特性及冷变形时效析出的影响[J]. 金属学报, 1989, 25(6): A462-465.
[18]. Zhou S. H., Napolitano R. E. Phase stability for the Cu-Zr system: First-principles, experiments and solution-based modeling[J]. Acta Materialia, 2010, 58(6):2186-2196.
[19]. Katsunori Y., Young C. S., Toshiaki Y., et al. Thermodynamic investigation of the Cu-Zr system[J]. Journal of Alloys and Compounds, 2008, 452(1):73-79.
[20]. Ghosh G. First-principle calculation of structural energetics of Cu-TM (TM=Ti, Zr, Hf) intermetallics[J]. Acta Materialia, 2007, 55(10): 3347-3374.
[21]. Zeng K. J., Mamalainen., Lukas H. L. A New Thermodynamic Description of the Cu-Zr system[J]. Journal of Phase Equilibria, 1994, 15(6): 577-586.
[22].Appello M., Fenici P. Solution heat treatment of a Cu-Cr-Zr alloy[J]. Materials Science and Engineering A, 1988, 102(1): 69-75.
[23].P Singh, A Lawley, S Friedman, Y.V. Murty. Microstructure and properties of spray cast Cu-Zr alloy[J]. Materials Science and Engineering A,1991,145(2) 243-255.
[24].刘安生.二元合金状态图集[M].北京: 冶金工业出版社, 2004.
[25].基金项目:北京科技项目(10231103),科研院所技术开发研究专项基金(2011DIA5k023)
[26].作者简介:彭丽军(1986-),男,博士,工程师,主要从事高性能铜合金的制备与加工,
[27].Email:penglijun198677@163.com

相似文献/References:

[1]彭丽军,解浩峰,尹向前,等.均匀化处理对Cu-Cr-Zr合金显微组织的影响[J].有色金属科学与工程,2014,(05):68.[doi:10.13264/j.cnki.ysjskx.2014.05.012]
 PENG Lijun,XIE Haofeng,YIN Xiangqian,et al.Effects of homogenization treatment on the microstructure of Cu-Cr-Zr alloy[J].,2014,(02预):68.[doi:10.13264/j.cnki.ysjskx.2014.05.012]

备注/Memo

备注/Memo:
刘安生.二元合金状态图集[M].北京: 冶金工业出版社, 2004. 基金项目:北京科技项目(10231103),科研院所技术开发研究专项基金(2011DIA5k023)作者简介:彭丽军(1986-),男,博士,工程师,主要从事高性能铜合金的制备与加工,
更新日期/Last Update: 2015-01-26