|本期目录/Table of Contents|

[1]陈敏,肖玄,汤爱涛.钛精矿制备Fe-TiCN金属陶瓷的研究[J].有色金属科学与工程,2016,(05预):410-414.
 CHEN Min,XIAO Xuan.Research on Fe-TiCN Cermet Prepared by Titanium Concentrate[J].,2016,(05预):410-414.
点击复制

钛精矿制备Fe-TiCN金属陶瓷的研究(/HTML)
分享到:

《有色金属科学与工程》[ISSN:1674-9669/CN:36-1311/TF]

卷:
期数:
2016年05期预
页码:
410-414
栏目:
出版日期:
2016-10-31

文章信息/Info

Title:
Research on Fe-TiCN Cermet Prepared by Titanium Concentrate
作者:
陈敏1肖玄1汤爱涛2
攀枝花学院,材料工程学院,四川 攀枝花 617000; 2.重庆大学,材料科学与工程学院,重庆 400044,)
Author(s):
CHEN Min XIAO Xuan
School of Materials Science and EngineeringPanZhihua UniversitySiChuan Province 617000China
关键词:
Fe-TiCN复合粉金属陶瓷组织硬度抗弯强度
分类号:
-
DOI:
-
文献标志码:
-
摘要:
以钛精矿和石墨通过碳热还原法制备的Fe-TiCN复合粉为原料,加入少量的镍、钼添加剂通过热压烧结制备了Fe-TiCN金属陶瓷。结合XRD、SEM&EDS、化学分析以及力学性能检测等方法研究了Fe-TiCN金属陶瓷成分和组织对其力学性能的影响。研究结果表明, Mo、Ni的添加对Fe-TiCN金属陶瓷组织有细化作用,当Mo、Ni添加量分别为2.5 %时金属陶瓷的综合力学性能最佳。

参考文献/References:

[1]汤爱涛,张龙柱,李奎,等.钛铁矿直接制备Ti(C,N)复合粉的组织与特性[J].金属热处理,2010(1):29-32.

[2]刘胜明,汤爱涛,陈敏,等. Fe含量对钛铁矿原位反应合成Al2O3-Ti(C,N)-Fe复合材料的影响[J]. 功能材料,2011,4(42): 722-725.

[3]陈敏,汤爱涛,刘胜明,等. TiCN复合粉及Mo添加剂对铁基复合材料组织和性能的影响[J].功能材料,2013,23(44):3378-3382.

[4]Li Qilong, Liu Ning, Liu Aijun, et al. Effects of NiTi additions on the microstructure and mechanical properties of Ti(C,N)-based cermets[J].International Journal of Refractory Metals and Hard Materials,2013,40: 43-50.

[5]Peng Ying, Miao Hezhuo, Peng Zhijian. Development of TiCN-based cermets: Mechanical properties and wear mechanism[J]. International Journal of Refractory Metals and Hard Materials,2013,39: 78-89.

[6]严迪科,张厚安,唐思文. TiCN超细粉末的制备工艺研究[J].中国粉体技术,2010,5(16): 22-24.

[7]冯燕,陈鸣,王建云,等. TiCN基金属陶瓷刀具材料研究[J].工具技术,2012,46(11: 43-45.

[8]E.Chicardi,Y.Torres,J.M.Cordoba,et al. Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1-x)(C0.5N0.5) solid sulutions[J].Materials and Design,2014,53: 435-444.

[9]I.Iparraguirre,N.Rodriguez,F.Ibarreta,et al. Effect of the Cr content on the sintering behavior of TiCN-WC-Ni-Cr3C2 powder mixtures [J]. International Journal of Refractory Metals and Hard Materials,2014,43: 125-131.

[10]Li Pingping, Ye Jinwen, Liu Ying, et al. Study on the formation of core-rim structure in Ti(CN)-based cermets[J]. International Journal of Refractory Metals and Hard Materials, 2012,35: 27-31.

[11]Alvaredo P,Gordo E,Van der Biest Omer,et al. Microstructural development and mechanical properties of iron based cermets processed by pressureless and spark plasma sintering[J].Materials Science and Engineering: A,2012,538:28-34.

[12]A.Rajabi,M.J.Ghazali,A.R.Daud. Chemical composition, microstructure and sintering temperature modifications on mechanical properties of TiC-based cermet-A review[J].Materials and Design,2015,67: 95-106.

[13]郑勇,熊惟皓,宗校军,等. Ti (C, N) 基金属陶瓷氮化处理后的表面组织结构及形成机理[J].硅酸盐学报,2003,31(3): 262-267.

[14]李合琴,何晓雄,曹闰,等. 纳米 Ni-20Fe 颗粒增韧 Al2O3 复合材料的力学性能与磁性能 [J]. 复合材料学报,2006,23(3): 103-107.

[15]Liu Ning, Xu Yudong, Li Zhenhong, et al. Influence of molybdenum addition on the microstructure and mechanical properties of TiC-based cermets with nano-TiN modification[J].Ceramics International,2003,29(8): 919-925.

[16]郑勇,范钟明. 混料方法对 Ti (C, N) 基金属陶瓷性能的影响[J].硬质合金,1997,14(1): 17-21.

[17]吴一. 天然钛铁矿碳热, 铝热原位合成金属基复合陶瓷的研究[D].南昌: 南昌大学,2005.

相似文献/References:

[1]陈敏,肖玄,汤爱涛.钛精矿制备Fe-TiCN金属陶瓷的研究[J].有色金属科学与工程,2015,(05):69.[doi:10.13264/j.cnki.ysjskx.2015.05.013]
 CHEN Min,XIAO Xuan,TANG Aitao.Fe-TiCN cermet preparation by titanium concentrate[J].,2015,(05预):69.[doi:10.13264/j.cnki.ysjskx.2015.05.013]

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2016-03-29