|本期目录/Table of Contents|

[1]杜开平,赵世强,吴胜利.熔融气化炉风口回旋区冶炼特征的数值模拟研究[J].有色金属科学与工程,2017,(02):8-13.[doi:10.13264/j.cnki.ysjskx.2017.02.002]
　DU Kaiping,ZHAO Shiqiang,WU Shengli.Numerical simulation of smelting characteristics around raceway in melter gasifier[J].,2017,(02):8-13.[doi:10.13264/j.cnki.ysjskx.2017.02.002]
点击复制

熔融气化炉风口回旋区冶炼特征的数值模拟研究(/HTML)
分享到：

《有色金属科学与工程》[ISSN:1674-9669/CN:36-1311/TF]

卷:
期数:
2017年02期
页码:
8-13
栏目:
出版日期:
2017-03-30

文章信息/Info

Title:
Numerical simulation of smelting characteristics around raceway in melter gasifier
作者:
杜开平1; 2; 赵世强2; 吴胜利2
1. 北京矿冶研究总院，北京 100160；2. 北京科技大学钢铁冶金新技术国家重点实验室，北京 100083
Author(s):
DU Kaiping1; 2;  ZHAO Shiqiang2;  WU Shengli2
1. Beijing General Research Institute of Mining and Metallurgy, Beijing 100160, China;2. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China
关键词:
熔融气化炉; 风口回旋区; 冶炼特征; 数值模拟
分类号:
TF531
DOI:
10.13264/j.cnki.ysjskx.2017.02.002
文献标志码:
A
摘要:
相比于高炉风口喷吹富氧热风，熔融气化炉风口采用常温纯氧，使得炉内质量、动量、热量的传输以及煤气流分布等冶炼特征与高炉存在较大差异.通过建立熔融气化炉风口回旋区二维数学模型，系统考察熔融气化炉风口回旋区内速度分布、温度分布及气体组分分布的冶炼特征.结果表明：在气固相热交换及焦炭（或块煤形成的半焦）燃烧反应的综合作用下，熔融气化炉风口回旋区内气体温度迅速升高至3 500 K以上；此外，风口前端存在小规模的气体循环流动现象，故风口前端扩孔破损现象严重，进而导致非计划休风率较高；为减少此类休风现象，可适当额外喷吹富氢燃料性气体（天然气、焦炉煤气），不仅能降低风口回旋区内气体温度，更可替代部分固体燃料，并充分发挥其中H2的高温还原优势，提升熔融气化炉冶炼效率.

参考文献/References:

[1] KUWABARA M, HSIEH Y S, MUGHI I. A kinetic model of coke combustion in the tuyere zone of blast furnace[J]. Tetsu-to-Hagané, 1980, 66(13): 1918-1927.
[2] HE J C, KUWABARA M, MUCHI I. Analysis of combustion zone in raceway under operation of pulverized coal injection[J]. Tetsu-to-Hagané, 1986, 72(14): 1847-1854.
[3] AOKI H, NOGAMI H, TSUGE H, et al. Simulation of transport phenomena around the raceway zone in the blast furnace with and without pulverized coal injection[J]. ISIJ International, 1993, 33(6): 646-656.
[4] TAKEDA K, LOCKWOOD F C. Integrated mathematical model of pulverized coal combustion in a blast furnace[J]. ISIJ International, 1997, 37(5): 432-440.
[5] NOGAMI H, MIURA T, FURUKAWA T. Simulation of transport phenomena around raceway zone in the lower part of blast furnace[J]. Tetsu-to-Hagané, 1992, 78(7): 1222-1229.
[6] SHEN Y, MALDONADO D, GUO B, et al. Computational fluid dynamics study of pulverized coal combustion in blast furnace raceway[J]. Industrial & Engineering Chemistry Research, 2009, 48(23): 10314-10323.
[7] SHEN Y, GUO B, YU A, et al. Three-dimensional modelling of in-furnace coal/coke combustion in a blast furnace[J]. Fuel, 2011, 90(2): 728-738.
[8] 应伟峰, 王臣, 邹宗树, 等. COREX熔化气化炉区域模型及其理论燃烧温度[J]. 中国冶金, 2009, 19(4): 13-17.
[9] 李海峰, 王臣, 邹宗树, 等. COREX喷煤模型及应用分析[J]. 过程工程学报, 2009, 19(增刊1): 349-353.
[10] BARMAN S C, MRUNMAYA K P, RANJAN M. Mathematical model development of raceway parameters and their effects on COREX process[J]. Journal of Iron and Steel Research International, 2011, 18(5): 20-24.
[11] LUO Z, DI Z, ZOU Z, et al. Application of fractal theory on raceway boundary in COREX melter-gasifier model[J]. Ironmaking & Steelmaking, 2013, 38(6): 417-421.
[12] SUN J, LUO Z, ZOU Z. Numerical simulation of raceway phenomena in a COREX melter-gasifier[J]. Powder Technology, 2015, 281(9): 159-166.
[13] AUSTIN P R, NOGAMI H, YAGI J. A mathematical model of four phase motion and heat transfer in the blast furnace[J]. ISIJ International, 1997, 37(5): 458-467.
[14] AUSTIN P R, NOGAMI H, YAGI J. A mathematical model for blast furnace reaction analysis based on the four fluid model[J]. ISIJ International, 1997, 37(8): 748-755.
[15] ERGUN S. Fluid flow through packed columns[J]. Chemical Engineering Progress, 1952, 48(2): 89-94.
[16] RANZ W E, MARSHALL W R. Evaporation from drop[J]. Chemical Engineering Progress, 1952, 48(2): 89-94.
[17] OMORI Y. Blast furnace phenomena and moddelling[M]. London and New York: Elsevier Applied Science, 1987.
[18] CHU M, YAGI J, SHEN F. Modelling on blast furnace process and innovative ironmaking technologies[M]. Shenyang: Northeastern University Press, 2006.
[19] PAL S, LAHIRI A K. Effect of tuyere blocking on melter gasifier performance[J]. ISIJ International, 2006, 46(1): 58-64.
[20] GUO Y, XU W, ZHU J, et al. The burden structure and its consumption in the melter gasifier of the COREX process[J]. Metallurgical and Materials Transactions B, 2013, 44(5): 1078-1085.
[21] 熊林, 朱锦明, 李建. COREX-3000风口破损的原因分析和对策[J]. 宝钢技术, 2011(6): 24-28.
[22] AUSTIN P R, NOGAMI H, YAGI J. Analysis of actual blast furnace opeartions and evaluatin of static liquid holdup effects by the four fluid model[J]. ISIJ International, 1998, 38(3): 246-255.
[23] QU Y, ZOU Z, XIAO Y. A comprehensive static model for COREX process[J]. ISIJ International, 2012, 52(12): 2186-2193.
[24] TAKAHASHI H, TANNO M, KATAYAMa J. Burden descending behaviour with renewal of deadman in a two dimensional cold model of blast furnace[J]. ISIJ International, 1996, 36(11): 1354-1359.

相似文献/References:

[1]刘肖,刘起航,湛文龙,等.熔融气化炉内块煤成焦后粉化现象的相关研究[J].有色金属科学与工程,2014,(03):21.[doi:10.13264/j.cnki.ysjskx.2014.03.0０４]
　LIU Xiao,LIU Qihang,ZHAN Wenlong,et al.Pulverization phenomena of coke formed by lump coal pyrolysis in melter gasifier[J].,2014,(02):21.[doi:10.13264/j.cnki.ysjskx.2014.03.0０４]
[2]刘肖,刘起航,湛文龙,等.熔融气化炉内块煤成焦后粉化现象的相关研究[J].有色金属科学与工程,2016,(05预):945.
　LIU Xiao,LIU Qi-hang,ZHAN Wen-long,et al.Investigation on pulverization phenomena of coke formed by lump coal pyrolysis in melter gasifier[J].,2016,(02):945.
[3]张万龙,黄正欣,左海滨,等.熔融气化炉填充床冶炼特征的数值模拟研究[J].有色金属科学与工程,2017,(06):25.
　ZHANG Wanlong,HUANG zhengxin ZUO Haibin,ZHAO Shiqiang.Numerical Simulation of Smelting Characteristics in moving bed of Melter Gasifier[J].,2017,(02):25.
[4]张万龙,黄正欣,左海滨,等.熔融气化炉填充床冶炼特征的数值模拟[J].有色金属科学与工程,2017,(06):7.[doi:10.13264/j.cnki.ysjskx.2017.06.002]
　ZHANG Wanlong,HUANG Zhengxin,ZUO Haibin,et al.Numerical simulation of smelting characteristics in moving-bed of melter gasifier[J].,2017,(02):7.[doi:10.13264/j.cnki.ysjskx.2017.06.002]
[5]杜开平,等.熔融气化炉风口回旋区冶炼特征的数值模拟研究[J].有色金属科学与工程,2017,(02预):21.
　DU Kaiping,ZHAO Shiqiang,et al.Numerical Simulation of Smelting Characteristics around Raceway in Melter Gasifier[J].,2017,(02):21.

备注/Memo

备注/Memo:
收稿日期：2016-09-22基金项目：国家自然科学基金资助项目（51234002）通信作者：杜开平（1987-　），男，博士，工程师，主要从事冶金反应过程数值模拟等方面的研究，E-mail: dukaiping@foxmail.com.
更新日期/Last Update: 2017-04-28